Dulux Trade Corrocote 3 Metal Primer
Key Information
Finish
Sheen
Coverage
Approx. 10m² per litre per coat
Drying Time
Touch dry: 1HR. Recoat: 4HRS.
Coats
2
Product Features
Water-based
Non-toxic and non-flammable
Quick drying
Low odour
Low VOC
Excellent adhesion properties
Primer for galvanised iron surfaces
Product Description
Dulux Trade Corrocote 3 Metal Primer is an excellent “travel” primer, being both quick drying and abrasion resistant. Provides excellent adhesion and a good base for top coating.Best available primer for galvanised iron surfaces, with excellent adhesion properties. An excellent anti-corrosive primer for use over correctly prepared mild steel & iron. Can be over-coated with most conventional paints, both solvent and water-based and Dulux Trade Tuffcote Epoxy Enamel. Non-toxic and non-flammable.
Application Description
Brush, roller or airless spray.
Health & Safety
"For detailed safety information refer to Material Safety Data Sheet. Keep out of reach of children. Ensure good ventilation during application and drying. Toxic fumes if welded - wear positive pressure air-fed masks for welding Not a fire hazard, but must be stored above 5°C. Water-based material – not normally flammable."
Tips & Advice
1. Preparing the Surfaces
Suitable for clean galvanised iron, abrasive blast-cleaned steel and non-ferrous metals.
2. Cleaning
Clean equipment immediately with water.
Copyright @ 2025 AkzoNobel Paints
